RSS

Configure Cached Exchange Mode in Outlook 2010

04 Jan
 

Configure Cached Exchange Mode in Outlook 2010

Published: May 12, 2010

This article describes how to configure Cached Exchange Mode for Microsoft Exchange Server e-mail accounts in Microsoft Outlook 2010.

In this article:

Overview

When an Outlook 2010 account is configured to use Cached Exchange Mode, Outlook 2010 works from a local copy of a user’s Exchange mailbox stored in an Offline Folder (.ost file) on the user’s computer, and with the Offline Address Book (OAB). The cached mailbox and OAB are updated periodically from the Exchange Server computer.

Cached Exchange Mode can be configured for Exchange Server e-mail accounts only. Cached Exchange Mode is supported by all versions of Exchange Server with which Outlook 2010 can connect; that is, by Exchange Server 2003 or later versions.

If you do not configure Cached Exchange Mode options, the current state of Cached Exchange Mode does not change for existing profiles when Microsoft Outlook is upgraded to a new version. For example, if a user account was configured to use Cached Exchange Mode in Office Outlook 2003 or Microsoft Office Outlook 2007, Cached Exchange Mode remains enabled when the user upgrades the software to Outlook 2010. The location for new .ost or OAB files is the default location: For Windows XP, the location is %userprofile%\Local Settings\Application Data\Microsoft\Outlook; for Windows Vista and Windows 7, the location is %userprofile%\AppData\Local\Microsoft\Outlook.

You can configure several options for Cached Exchange Mode. These include the default .ost file location for users in your organization who do not already have .ost files for Cached Exchange Mode. If you do not specify a different .ost file location, Outlook creates an .ost file in the default location when users start Outlook in Cached Exchange Mode.

You can lock down the settings to customize Cached Exchange Mode by using the Outlook Group Policy Administrative template (Outlk14.adm). Or, you can configure default settings by using the Office Customization Tool (OCT), in which case users can change the settings.

Before you begin

Before you start deployment, review Plan an Exchange deployment in Outlook 2010 and Office Customization Tool in Office 2010 to determine which settings you might have to configure for Cached Exchange Mode.

To download the Outlook 2010 administrative templates, see Office 2010 Administrative Template files (ADM, ADMX, ADML) and Office Customization Tool http://go.microsoft.com/fwlink/?LinkId=189316). For more information about Group Policy, see Group Policy overview for Office 2010 and Enforce settings by using Group Policy in Office 2010.

For more information about the OCT, see Office Customization Tool in Office 2010.

If you migrate from an earlier version of Outlook with Cached Exchange Mode enabled, determine which format your users’ .ost files are in (ANSI or Unicode). See How to determine the mode that Outlook 2007 or Outlook 2003 is using for offline folder files (http://go.microsoft.com/fwlink/?LinkId=159924).

Configure Cached Exchange Mode

Use the following procedures to configure Cached Exchange Mode settings.

To configure Cached Exchange Mode settings by using the Office Customization Tool

  1. In the Office Customization Tool, in the tree view, locate Outlook, click Add Accounts. In the Account Name column of the reading pane list, click the account that you want to configure, and then click Modify. The Exchange Settings dialog box appears.

    Note that in the tree view of the OCT you must click Outlook Profile and then select Modify Profile or New Profile to add an Exchange account and configure Exchange Server settings.

  2. To specify a new location for users’ Outlook data files (.ost), in the Exchange Settings dialog box click More Settings, and then select Enable offline use. Enter a folder path and file name for the .ost file location. You can also enter a path in the Directory path to store the Offline Address Book files text box

  3. To enable or disable Cached Exchange Mode, or to specify default download behavior when Cached Exchange Mode is enabled, click the Cached Mode tab.

  4. Select Configure Cached Exchange Mode and then select the Use Cached Exchange Mode check box to enable Cached Exchange Mode for users. By default, Cached Exchange Mode is disabled if you do not select the Use Cached Exchange Mode check box.

  5. If you enabled Cached Exchange Mode in step 4, select a default download option on the Cached Mode tab:

    • Download only headers   Users see header information and the beginning of the message or item body (a 256-KB plain-text buffer of information). Full items can be downloaded later in several ways; for example, by double-clicking to open the message or by clicking Download the rest of this message now in the reading pane.
    • Download headers followed by the full item   All headers are downloaded first, and then full items are downloaded. The download order might not be chronological. Outlook downloads headers followed by full items in the folder that the user is currently accessing, and then downloads headers followed by full items in folders that the user has recently viewed.
    • Download full items   Full items are downloaded. We recommend this option unless you have a slow network connection. The download order might not be chronological. Outlook downloads full items in the folder that the user is currently accessing, and then downloads full items in folders that the user has recently viewed.
  6. To turn off Headers Only mode, select the Download full items option button and clear the On slow connections, download only headers check box. Downloading only headers is the default behavior when users have slow connections. There are scenarios in which Outlook perceives that users have slow connections when users’ data throughput is fast, or vice versa. In these situations, you might want to set or clear this option.

  7. Disable the downloading of shared non-mail folders as part of Cached Exchange Mode synchronizations to users’ .ost files. By default, shared non-mail folders are downloaded. Downloading shared non-mail folders increases the size of users’ .ost files.

  8. Download Public Folder Favorites as part of Cached Exchange Mode synchronizations to users’ .ost files. By default, Public Folder Favorites are not downloaded. As with shared non-mail folders, downloading Public Folder Favorites increases the size of users’ .ost files. Also, synchronizing Public Folder Favorites causes additional network traffic that might be unwelcome for users who have slow connections.

  9. If you have to enable shared mail folders that use Cached Exchange Mode, follow these steps:

    1. In OCT, in the tree view, locate Additional Content and then click Add registry entries.
    2. In the reading pane, click Add.
    3. Enter the following information:

      Root Data type Key Value name Value data

      HKEY_Current_User

      REG_SZ

      Software\Microsoft\Office\14.0\Outlook\CachedMode

      CacheOthersMail

      1

    4. Click OK.

To configure Cached Exchange Mode settings by using Group Policy

  1. In Group Policy, load the Outlook 2010 template (Outlk14.adm).

  2. To customize Cached Exchange Mode options, open the Group Policy Management Console (GPMC) and in the tree view expand Domains and then expand Group Policy Objects.

  3. Right-click the policy object that you want and then click Edit. The Group Policy Management Editor window opens.

  4. In the tree view, expand User Configuration, expand Policies, expand Administrative Templates, expand Classic Administrative Templates (ADM), expand Microsoft Outlook 2010, expand Account Settings, and then click Exchange. You can also expand Exchange and then click Cached Exchange Mode.

  5. In the reading pane, in the Setting column, double-click the policy that you want to set. For example, in the Exchange reading pane, double-click Use Cached Exchange Mode for new and existing Outlook profiles.

  6. Select Enabled and select an option (if appropriate).

  7. Click OK.

To configure a default .ost location by using Group Policy

  1. In Group Policy, load the Outlook 2010 template (Outlk14.adm).

  2. To configure a default .ost location, open the Group Policy Management Console (GPMC) and in the tree view expand Domains and then expand Group Policy Objects.

  3. Right-click the policy object that you want and then click Edit. The Group Policy Management Editor window opens.

  4. In the tree view, expand User Configuration, expand Policies, expand Administrative Templates, expand Classic Administrative Templates (ADM), expand Microsoft Outlook 2010, expand Miscellaneous, and then click PST Settings.

  5. Double-click Default location for OST files.

  6. Select Enabled to enable the policy setting.

  7. In the Default location for OST files text box, enter the default location for .ost files. For example:

    %userprofile%\Local Settings\Application Data\Microsoft\newfolder.

  8. Click OK.

    You can define a new default location for both Personal Outlook data files (.pst) and .ost files. After you click PST Settings in the tree view, click the Default location for PST and OST files setting in the reading pane.

To force upgrade of non-Unicode ANSI format .ost files to Unicode

  1. For users who have existing non-Unicode ANSI format .ost files, the following procedure does not upgrade ANSI .ost files to Unicode .ost files. The procedure merely creates a new Unicode .ost file for the user’s profile, leaving the original ANSI .ost files alone.

  2. To determine which format your users’ .ost files are in (ANSI or Unicode), see How to determine the mode that Outlook 2007 or Outlook 2003 is using for offline folder files (http://go.microsoft.com/fwlink/?LinkId=159924).

  3. In Group Policy, load the Outlook 2010 template (Outlk14.adm).

  4. Open the Group Policy Management Console (GPMC) and in the tree view expand Domains and then expand Group Policy Objects.

  5. Right-click the policy object that you want and then click Edit. The Group Policy Management Editor window opens.

  6. In the tree view, expand User Configuration, expand Policies, expand Administrative Templates, expand Classic Administrative Templates (ADM), expand Microsoft Outlook 2010, expand Account Settings, and then expand Exchange.

  7. Double-click Exchange Unicode Mode — Ignore OST Format.

  8. Select Enabled to enable the policy configuration.

  9. In the Choose whether existing OST format determines mailbox mode drop-down list, click Create new OST if format doesn’t match mode.

  10. Click OK.

  11. Double-click Exchange Unicode Mode — Silent OST format change.

  12. Select Enabled to enable the policy configuration, and then click OK.

  13. Double-click Exchange Unicode Mode — Turn off ANSI mode.

  14. Select Enabled to enable the policy configuration, and then click OK.

  15. In the tree view, expand Miscellaneous, click PST Settings, and in the reading pane double-click Preferred PST Mode (Unicode/ANSI).

  16. Select Enabled, in the Choose a default format for new PSTs drop-down list click Enforce Unicode PST, and then click OK.

Advertisements
 
1 Comment

Posted by on January 4, 2011 in Exchange

 

One response to “Configure Cached Exchange Mode in Outlook 2010

  1. .pst viewer

    August 1, 2012 at 8:52 pm

    I blog often and I truly thank you for your content. This article has really
    peaked my interest. I’m going to book mark your site and keep checking for new information about once per week. I opted in for your RSS feed too.

     

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s

 
%d bloggers like this: